{"id":213,"date":"2026-08-15T15:00:42","date_gmt":"2026-08-15T15:00:42","guid":{"rendered":"https:\/\/mkhomestyles.co.ke\/blog\/?p=213"},"modified":"2026-08-15T15:11:26","modified_gmt":"2026-08-15T15:11:26","slug":"what-can-a-6-2kw-solar-system-run-in-kenya-complete-guide","status":"publish","type":"post","link":"https:\/\/mkhomestyles.co.ke\/blog\/what-can-a-6-2kw-solar-system-run-in-kenya-complete-guide\/","title":{"rendered":"What Can a 6.2kW Solar System Run in Kenya? Complete Guide"},"content":{"rendered":"

\"Bluetti<\/p>\n

A 6.2kW solar system is a substantial residential solar power solution capable of powering many appliances in a typical Kenyan home. However, the question is not simply whether a solar system is rated at 6.2kW. What matters is how much power your appliances consume, which appliances operate simultaneously, how much energy your household uses each day, and whether the system includes enough battery storage.<\/span><\/p>\n

If you are considering a <\/span>6.2kW solar system in Kenya<\/span><\/a>, understanding its actual capacity can help you determine whether it is suitable for your home, business, borehole, or backup-power requirements.<\/span><\/p>\n

This guide explains what a 6.2kW solar system can run, how many appliances it can support at once, how battery storage affects performance, and what Kenyan homeowners should consider before installing one.<\/span><\/p>\n

What Is a 6.2kW Solar System?<\/b><\/h2>\n

Before looking at individual appliances, it is important to understand what the 6.2kW rating actually means. A <\/span>solar system’s kilowatt rating<\/span><\/a> primarily describes its power capacity rather than the total amount of electricity it will generate over the course of a day.<\/span><\/p>\n

A 6.2kW solar system can be designed around solar panels with a combined rated capacity of approximately 6.2kWp, or around an inverter capable of handling up to 6.2kW of AC output, depending on the system configuration. <\/span>The distinction is important.<\/span><\/p>\n

kW measures power at a particular moment, while kWh measures energy consumed or produced over time. Therefore, a 6.2kW system does not necessarily generate 6.2kWh every hour or continuously deliver 6.2kW throughout the day.<\/span><\/p>\n

Actual solar production depends on sunlight, panel orientation, shading, temperature, system losses, and location.<\/span> Kenya has strong solar potential<\/span><\/a>, and the Global Solar Atlas provides country-specific data covering photovoltaic power potential, solar irradiation, and other factors used for solar planning.<\/span><\/p>\n

How Much Load Can a 6.2kW Solar System Handle?<\/b><\/h2>\n

The most straightforward way to understand a 6.2kW solar system is to think of it as a simultaneous electrical load.<\/span><\/p>\n

A system rated for 6.2kW can theoretically supply up to approximately 6,200 watts of instantaneous load, assuming the inverter is actually rated for that output and operating conditions permit it.<\/span><\/p>\n

For example, if your appliances are consuming:<\/span><\/p>\n

– Refrigerator \u2013 150W<\/span><\/p>\n

– Television \u2013 100W<\/span><\/p>\n

– LED lights \u2013 100W<\/span><\/p>\n

– Wi-Fi router \u2013 20W<\/span><\/p>\n

– Laptop \u2013 70W<\/span><\/p>\n

– Washing machine \u2013 500W<\/span><\/p>\n

– Microwave \u2013 1,200W<\/span><\/p>\n

– Water pump \u2013 750W<\/span><\/p>\n

The combined running load would be approximately 2,890W, leaving substantial inverter capacity.<\/span><\/p>\n

However, this does not mean you should deliberately operate appliances until you reach exactly 6,200W. Appliances with motors and compressors can have starting or surge power considerably higher than their normal running power.<\/span><\/p>\n

This is particularly relevant for refrigerators, freezers, water pumps, <\/span>borehole pumps<\/span><\/a>, air conditioners, and some<\/span> power tools<\/span><\/a>.<\/span><\/p>\n

What Appliances Can a 6.2kW Solar System Run?<\/b><\/h2>\n

The real-world usefulness of a 6.2kW solar system becomes clearer when we look at common household appliances. Actual consumption varies significantly by appliance model, size, efficiency, and operating cycle, so the figures below should be treated as planning estimates rather than guaranteed specifications.<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Appliance<\/b><\/td>\nApproximate Running Power*<\/b><\/td>\n<\/tr>\n
LED lighting<\/span><\/td>\n5\u201320 W per bulb<\/span><\/td>\n<\/tr>\n
Wi-Fi router<\/span><\/td>\n10\u201325 W<\/span><\/td>\n<\/tr>\n
Television<\/span><\/td>\n50\u2013150 W<\/span><\/td>\n<\/tr>\n
Laptop<\/span><\/td>\n45\u2013100 W<\/span><\/td>\n<\/tr>\n
Refrigerator<\/span><\/td>\n100\u2013300 W<\/span><\/td>\n<\/tr>\n
Freezer<\/span><\/td>\n100\u2013400 W<\/span><\/td>\n<\/tr>\n
Decoder<\/span><\/td>\n10\u201330 W<\/span><\/td>\n<\/tr>\n
Washing machine<\/span><\/td>\n400\u20131,000 W<\/span><\/td>\n<\/tr>\n
Microwave<\/span><\/td>\n800\u20131,500 W<\/span><\/td>\n<\/tr>\n
Blender<\/span><\/td>\n300\u20131,000 W<\/span><\/td>\n<\/tr>\n
Electric kettle<\/span><\/td>\n1,500\u20133,000 W<\/span><\/td>\n<\/tr>\n
Iron<\/span><\/td>\n1,000\u20132,500 W<\/span><\/td>\n<\/tr>\n
Water pump<\/span><\/td>\n500\u20132,000 W+<\/span><\/td>\n<\/tr>\n
Air conditioner<\/span><\/td>\n800\u20132,500 W+<\/span><\/td>\n<\/tr>\n
Electric cooker\/hotplate<\/span><\/td>\n1,000\u20133,000 W+<\/span><\/td>\n<\/tr>\n
Water heater<\/span><\/td>\n1,500\u20133,500 W+<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Actual power consumption varies by appliance model, operating mode, size, and efficiency. Always check the appliance nameplate or manufacturer’s specifications before sizing a solar system.<\/span><\/p>\n

With sensible load management, a 6.2kW system can therefore support a combination of lighting, TVs, refrigerators, freezers, computers, internet equipment, washing machines, microwaves, small kitchen appliances, and selected pumps.<\/span><\/p>\n

The challenge arises when several high-power heating or motor-driven appliances operate simultaneously.<\/span><\/p>\n

Can a 6.2kW Solar System Run a Fridge and Freezer?<\/b><\/h2>\n

Yes. Refrigerators and freezers are generally well within the capability of a properly configured 6.2kW solar system.<\/span><\/p>\n

A modern refrigerator may consume relatively little power while running, although its compressor creates a higher starting demand. A freezer behaves similarly.<\/span><\/p>\n

For a household with a refrigerator and freezer, the important consideration is not only their running wattage but also their compressor startup surge.<\/span><\/p>\n

A<\/span> properly sized inverter<\/span><\/a> should therefore have adequate surge capability.<\/span><\/p>\n

This is one reason why choosing a solar system should involve more than simply adding the wattage printed on appliances.<\/span><\/p>\n

Can a 6.2kW Solar System Run a Washing Machine?<\/b><\/h2>\n

In most cases, yes. A washing machine may have a relatively moderate motor load, but models that heat water can consume substantially more electricity during the heating cycle.<\/span><\/p>\n

A 6.2kW solar system can comfortably support a washing machine alongside lower-power household loads. However, running a washing machine at the same time as an electric kettle, a cooker, a water heater, and an iron could significantly increase the household load.<\/span><\/p>\n

Where possible, high-power appliances should be scheduled rather than operated simultaneously.<\/span><\/p>\n

Can a 6.2kW Solar System Run a Microwave?<\/b><\/h2>\n

Yes. A microwave typically represents a manageable load for a 6.2kW inverter, although its electrical input can exceed the appliance’s advertised cooking power.<\/span><\/p>\n

For example, if a microwave draws around 1,200W, it would use approximately 1.2kW while operating. That leaves considerable capacity for lower-power appliances.<\/span><\/p>\n

A microwave operating alongside lights, a refrigerator, a television, a router, and a laptop is generally a much easier load for a 6.2kW system than a microwave operating simultaneously with multiple electric heating appliances.<\/span><\/p>\n

Can a 6.2kW Solar System Run an Electric Cooker?<\/b><\/h2>\n

This requires more careful consideration. Electric cookers, ovens, hotplates and induction cookers can consume several kilowatts. A large cooker with multiple active heating elements can therefore use a substantial proportion of a 6.2kW inverter’s output.<\/span><\/p>\n

For example, a hypothetical load consisting of:<\/span><\/p>\n

– Two 1,500W cooking elements = 3,000W<\/span><\/p>\n

– Oven = 2,000W<\/span><\/p>\n

– Refrigerator = 200W<\/span><\/p>\n

– Lighting = 100W<\/span><\/p>\n

– Television = 100W<\/span><\/p>\n

would already approach 5.4kW.<\/span><\/p>\n

Add a kettle or microwave, and the system could approach or exceed the inverter’s rated output.<\/span><\/p>\n

Therefore, a 6.2kW solar system can support electric cooking, but the number of cooking appliances operating simultaneously matters.<\/span><\/p>\n

Can a 6.2kW Solar System Run a Water Pump?<\/b><\/h2>\n

Yes, provided the pump and inverter are appropriately matched.<\/span><\/p>\n

Water pumps are common energy loads in Kenyan homes, farms, apartments and businesses. Borehole pumps can have considerably higher starting requirements than their normal running power.<\/span><\/p>\n

A 6.2kW solar system can support many domestic water pumps, but the exact answer depends on the pump’s:<\/span><\/p>\n

– Motor power<\/span><\/p>\n

– Starting current<\/span><\/p>\n

– Voltage<\/span><\/p>\n

– Phase<\/span><\/p>\n

– Running load<\/span><\/p>\n

– Pumping duration<\/span><\/p>\n

– Required daily water volume<\/span><\/p>\n

For larger borehole pumps, it may be better to design the solar system specifically around the pump rather than assuming that any 6.2kW system will operate it.<\/span><\/p>\n

Can a 6.2kW Solar System Run an Air Conditioner?<\/b><\/h2>\n

It can, but the air conditioner’s size and efficiency are critical.<\/span><\/p>\n

A small, energy-efficient inverter air conditioner may consume considerably less electricity than a large conventional unit. An air conditioner can also experience a significant startup or a change in compressor load.<\/span><\/p>\n

A 6.2kW solar system could therefore support a properly selected air conditioner alongside ordinary household appliances, but running a large AC unit together with an electric cooker, water heater, and several other high-power appliances may exceed the inverter’s available capacity.<\/span><\/p>\n

This is why a professional load assessment is recommended before installation.<\/span><\/p>\n

How Many Appliances Can a 6.2kW Solar System Run at Once?<\/b><\/h2>\n

There is no fixed number. A 6.2kW system could run dozens of small appliances simultaneously because devices such as LED bulbs, routers, chargers, and televisions consume relatively little power.<\/span><\/p>\n

Conversely, only a few high-power appliances could consume most of the system’s capacity.<\/span><\/p>\n

For example, consider an illustrative household load:<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Appliance<\/b><\/td>\nExample Load<\/b><\/td>\n<\/tr>\n
Refrigerator<\/span><\/td>\n200 W<\/span><\/td>\n<\/tr>\n
Freezer<\/span><\/td>\n250 W<\/span><\/td>\n<\/tr>\n
2 TVs<\/span><\/td>\n200 W<\/span><\/td>\n<\/tr>\n
Lighting<\/span><\/td>\n150 W<\/span><\/td>\n<\/tr>\n
Router + electronics<\/span><\/td>\n50 W<\/span><\/td>\n<\/tr>\n
Laptop<\/span><\/td>\n80 W<\/span><\/td>\n<\/tr>\n
Washing machine<\/span><\/td>\n700 W<\/span><\/td>\n<\/tr>\n
Microwave<\/span><\/td>\n1,200 W<\/span><\/td>\n<\/tr>\n
Water pump<\/span><\/td>\n750 W<\/span><\/td>\n<\/tr>\n
Iron<\/span><\/td>\n1,500 W<\/span><\/td>\n<\/tr>\n
Total<\/b><\/td>\n5,080 W<\/b><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

This hypothetical combination is below 6.2kW, although the inverter’s surge capacity and actual appliance specifications still need to be checked.<\/span><\/p>\n

The important lesson is that solar capacity should be assessed by total simultaneous wattage, not by appliance count.<\/span><\/p>\n

6.2kW Solar System Load Calculation<\/b><\/h2>\n

A simple <\/span>load calculation<\/span><\/a> can help homeowners understand how to size a solar system.<\/span><\/p>\n

Start by listing every appliance you expect to use. Record its rated wattage and estimate how long it operates each day.<\/span><\/p>\n

For example:<\/span><\/p>\n

Energy used = Power \u00d7 Operating time<\/span><\/p>\n

A 200W refrigerator that averages 8 equivalent hours of compressor operation would represent approximately 1.6kWh of energy under that simplified assumption. Actual refrigerators cycle on and off, so their real consumption should ideally be based on measured or manufacturer data.<\/span><\/p>\n

Repeat this process for major appliances and add the results.<\/span><\/p>\n

This gives you an estimate of your household’s daily energy requirement in kWh.<\/span><\/p>\n

The next step is to separate:<\/span><\/p>\n

    \n
  1. Peak load \u2013 the appliances operating simultaneously.<\/span><\/li>\n
  2. Daily energy consumption \u2013 the total electricity consumed over 24 hours.<\/span><\/li>\n
  3. Surge load \u2013 additional startup power required by motors and compressors.<\/span><\/li>\n<\/ol>\n

    A properly designed solar system must account for all three.<\/span><\/p>\n

    How Much Energy Can a 6.2kW Solar System Produce in Kenya?<\/b><\/h2>\n

    A common mistake is to assume that a 6.2kW solar system will produce 6.2kW for the entire day.<\/span><\/p>\n

    Solar panels generate meaningful power only when adequate sunlight is available, and their output varies throughout the day.<\/span><\/p>\n

    A simplified planning calculation might use an equivalent 4\u20135 peak-sun-hour range as an illustrative scenario. At 4.5 equivalent full-sun hours:<\/span><\/p>\n

    6.2kW \u00d7 4.5 hours = approximately 27.9kWh\/day<\/span><\/p>\n

    That is a theoretical planning estimate before accounting for temperature, wiring losses, inverter efficiency, dust, shading, panel orientation, and other system losses.<\/span><\/p>\n

    Actual production will vary by location and season. Kenya’s solar resource can be assessed using the Global Solar Atlas, which provides photovoltaic power potential and solar irradiation data for the country.<\/span><\/p>\n

    This distinction between 6.2kW of power capacity and daily kWh production is essential when determining whether the system can meet a household’s total energy needs.<\/span><\/p>\n

    What Battery Size Is Suitable for a 6.2kW Solar System?<\/b><\/h2>\n

    The solar panels and inverter determine how much power can be produced or delivered, while the battery determines how much energy can be stored for later use.<\/span><\/p>\n

    A 6.2kW solar system can therefore be paired with different battery capacities depending on the customer’s requirements.<\/span><\/p>\n

    For example, a homeowner may want enough battery storage to:<\/span><\/p>\n

    – Keep lights operating at night<\/span><\/p>\n

    – Run a refrigerator overnight<\/span><\/p>\n

    – Power a TV and internet equipment<\/span><\/p>\n

    – Operate security systems<\/span><\/p>\n

    – Provide backup during power outages<\/span><\/p>\n

    – Support selected appliances after sunset<\/span><\/p>\n

    A 10kWh battery, for example, does not necessarily mean the homeowner can use the entire 10kWh. Usable capacity depends on battery chemistry, depth-of-discharge limits, temperature, inverter efficiency, and the manufacturer’s specifications.<\/span><\/p>\n

    If your primary objective is nighttime backup, battery sizing should be based on the nighttime energy requirement rather than simply matching the battery to the 6.2kW solar panel rating.<\/span><\/p>\n

    Is a 6.2kW Solar System Enough for a 3- or 4-Bedroom House?<\/b><\/h2>\n

    For many homes, it can be an excellent starting point. However, the number of bedrooms alone cannot determine whether a solar system is adequate.<\/span><\/p>\n

    A 3-bedroom home with LED lighting, efficient appliances, a refrigerator, a television, computers, and a modest water pump could have a significantly lower electricity demand than a smaller home equipped with an electric cooker, multiple water heaters, several air conditioners, and large pumps.<\/span><\/p>\n

    The correct question is therefore not \u201cHow many bedrooms can 6.2kW solar power?\u201d<\/span><\/p>\n

    Instead, ask: \u201cWhat is the home’s peak load and daily energy consumption?\u201d<\/span><\/p>\n

    This approach produces a much more accurate system design.<\/span><\/p>\n

    6.2kW Solar System vs Grid Electricity in Kenya<\/b><\/h2>\n

    A 6.2kW solar system can significantly reduce dependence on grid electricity, particularly when high-energy appliances are operated during periods of strong solar production.<\/span><\/p>\n

    Kenya has continued to expand renewable energy and is developing policies to increase renewable energy, energy efficiency, and electricity access. The<\/span> IEA reports<\/span><\/a> that nearly 90% of Kenya’s electricity generation mix was derived from renewable sources in its 2025 assessment, highlighting the country’s strong position in renewable energy.<\/span><\/p>\n

    However, solar does not automatically mean complete energy independence.<\/span><\/p>\n

    A grid-connected system, a <\/span>hybrid system,<\/span><\/a> or an off-grid system will behave differently. Battery storage, backup sources, system design, and the customer’s electricity profile all affect how much grid electricity is displaced.<\/span><\/p>\n

    What Determines the Performance of a 6.2kW Solar System?<\/b><\/h2>\n

    The headline 6.2kW figure is only one part of the system. Several other factors influence performance.<\/span><\/p>\n

    Solar Panel Quality and Configuration<\/b><\/h3>\n

    The number, efficiency, and electrical configuration of the panels affect energy production. Panel orientation, tilt, and shading also matter.<\/span><\/p>\n

    Inverter Capacity<\/b><\/h3>\n

    The inverter must be capable of handling the expected continuous load and appropriate startup surges.<\/span><\/p>\n

    Battery Capacity<\/b><\/h3>\n

    For hybrid or off-grid systems, insufficient battery storage can limit nighttime operation even when the solar panels are large enough.<\/span><\/p>\n

    Appliance Efficiency<\/b><\/h3>\n

    Energy-efficient refrigerators, TVs, lighting, and air conditioners can dramatically reduce household electricity consumption.<\/span><\/p>\n

    Solar Resource and Weather<\/b><\/h3>\n

    Solar production changes with the weather and season. Kenya has strong solar potential, but actual output at a particular site should be evaluated based on site-specific conditions. The Global Solar Atlas provides solar resource and PV potential datasets that can assist with preliminary assessment.<\/span><\/p>\n

    Shading and Installation Quality<\/b><\/h3>\n

    Trees, buildings, dust, and incorrect panel positioning can reduce production. Professional installation and appropriate system design are therefore important.<\/span><\/p>\n

    Common Mistakes When Choosing a 6.2kW Solar System<\/b><\/h2>\n

    Understanding common mistakes can help homeowners avoid buying a system that looks adequate on paper but performs poorly in practice.<\/span><\/p>\n

    Looking only at panel capacity.<\/b><\/h3>\n

    A 6.2kWp panel array does not tell you how much energy your home consumes each day.<\/span><\/p>\n

    Ignoring startup loads.<\/b><\/h3>\n

    Pumps, refrigerators, freezers and air conditioners can require additional power when starting.<\/span><\/p>\n

    Choosing too little battery storage.<\/b><\/h3>\n

    A large solar array cannot compensate for an undersized battery when the household needs significant nighttime backup.<\/span><\/p>\n

    Running every high-power appliance simultaneously.<\/b><\/h3>\n

    Electric cookers, kettles, irons, water heaters and microwaves can quickly consume several kilowatts.<\/span><\/p>\n

    Ignoring energy efficiency.<\/b><\/h3>\n

    Reducing consumption can sometimes be more economical than simply increasing the size of the solar system.<\/span><\/p>\n

    Who Is a 6.2kW Solar System Best For?<\/b><\/h2>\n

    A 6.2kW solar system can be suitable for:<\/span><\/p>\n

     <\/p>\n

    – Medium to large residential homes<\/span><\/p>\n

    – 3- and 4-bedroom homes with moderate-to-high electricity demand<\/span><\/p>\n

    – Homes with several refrigerators and freezers<\/span><\/p>\n

    – Homes requiring reliable backup power<\/span><\/p>\n

    – Small offices<\/span><\/p>\n

    – Small businesses<\/span><\/p>\n

    – Homes with water pumps<\/span><\/p>\n

    – Customers wanting to reduce grid electricity consumption<\/span><\/p>\n

    – Properties with multiple electronic appliances<\/span><\/p>\n

    It can be particularly attractive to Kenyan households seeking a balance among solar generation, backup power, and everyday appliance use.<\/span><\/p>\n

    Final Verdict: What Can a 6.2kW Solar System Run in Kenya?<\/b><\/h2>\n

    So, what can a 6.2kW solar system run in Kenya?<\/span><\/p>\n

    In the right configuration, it can support a substantial selection of household appliances, including refrigerators, freezers, TVs, lights, computers, routers, washing machines, microwaves, small water pumps, and other everyday electrical loads.<\/span><\/p>\n

    It can also support higher-power appliances such as air conditioners, electric cookers, irons, kettles, and larger pumps. Still, these appliances require careful load management because they can consume a large portion of the available 6.2kW capacity.<\/span><\/p>\n

    The key is to understand that 6.2kW refers to power capacity, not unlimited electricity. A successful solar installation must consider peak load, daily kWh consumption, battery capacity, inverter surge capability, solar resource, appliance efficiency, and future electricity needs.<\/span><\/p>\n

    For Kenyan homeowners, the best approach is to have the system professionally sized to actual household consumption rather than choosing a solar system based solely on the number of bedrooms or appliances.<\/span><\/p>\n

    Get the Right Solar System for Your Home from MK Homestyles<\/b><\/h2>\n

    If you are considering a 6.2kW solar system in Kenya, choosing the right components and sizing the system correctly is just as important as the headline capacity.<\/span><\/p>\n

    MK Homestyles<\/span><\/a> provides solar and power solutions for Kenyan homes and businesses, helping customers choose systems that meet their actual power needs. Whether you need solar panels, a hybrid solar inverter, batteries, solar backup power or a complete home solar solution, the right system should be designed around the appliances you actually use.<\/span><\/p>\n

    Before purchasing, prepare a list of your major appliances, their wattages, and how many hours you use each one each day. This allows a solar professional to estimate your peak load and daily energy consumption and recommend an appropriate configuration.<\/span><\/p>\n

    For customers in Nairobi and across Kenya, a properly designed solar system can provide dependable, clean energy, reduce reliance on grid electricity and give you greater control over your household’s power needs.<\/span><\/p>\n

    Looking for a 6.2kW solar system in Kenya?<\/span> Contact MK Homestyles <\/span><\/a>for professional guidance on solar panels, inverters, batteries and complete solar power solutions tailored to your energy requirements.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

    A 6.2kW solar system is a substantial residential solar power solution capable of powering many appliances in a typical Kenyan home. However, the question…<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"om_disable_all_campaigns":false,"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-213","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"aioseo_notices":[],"jetpack_featured_media_url":"","_links":{"self":[{"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/posts\/213","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/comments?post=213"}],"version-history":[{"count":2,"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/posts\/213\/revisions"}],"predecessor-version":[{"id":217,"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/posts\/213\/revisions\/217"}],"wp:attachment":[{"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/media?parent=213"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/categories?post=213"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mkhomestyles.co.ke\/blog\/wp-json\/wp\/v2\/tags?post=213"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}